Skip to main content

Resolving issues with VIPM connecting to LabVIEW

VIPM Support
Updated

Note: If the problem you are having is that your list of LabVIEW versions list is empty in VIPM, then look here.
For Mac OS: See also Here 

Sometimes VIPM has trouble connecting to LabVIEW to perform installation of Add-ons. The following is a list of things you can try to fix the problem.

  • LabVIEW machine access list - Make sure you have the following IP addresses configured in your VI Server setting in LabVIEW:
    1. localhost
    2. 127.0.0.1
    3. asterix (*)
    4. Sometimes: <your IP address on the network>
    5. Sometimes: <your PC name>
2015-09-05_0945.png
  • Exported VIs list

                2012-09-12_2209.png 
  • LabVIEW VI Server Settings - Make sure you have the following VI Server settings in your LabVIEW Options. Note that the Port number  will be different on your system. If you have multiple LabVIEW versions, then you should assign a different port number for each LabVIEW version. Normally you should not have to adjust your port numbers since VIPM will set these automatically
2012-05-21_1144.png
 
  • VIPM port list configuration - If you have multiple LabVIEW versions, then you should assign a different port number for each LabVIEW version. Normally you should not have to adjust your port numbers since VIPM will set these automatically. However, in case of problems, you should make sure that VIPM has the correct port identified in the VIPM options window.
2012-05-21_1158.png
  • Webserver connection
    1. Check LabVIEW connection to web server by trying to open "Example Finder" (Help >> Find Examples)
    2. If Example Finder does not open, repair LabVIEW and then try VIPM
  • Configure the Windows Firewall:
    1. Click Start in windows. Type: "allow a program through windows firewall" then select it.
    2. Make sure LabVIEW 20xx and VIPM are added to this list and are allowed to communicate through the windows firewall.
  • Restart LabVIEW - If the above setting appear correct, then you should restart LabVIEW.
  • Restart Computer - If this does not work then you should restart your computer and try the connection again. Sometimes, restarting your computer resolves the problem.
  • Launch VIPM with "Run As Administrator" Privileges:
    1. Right mouse click on VIPM shortcut and select "Run As Administrator" option
    2. If the option is not listed, try SHIFT+RightMouseClick

Related articles

Comments

8 comments

Date Votes
  • costas

    Thanks JKI this solved my issue.

    0
  • SHAWN DOYLE

    thank you JKL this was very helpful and solved my issue.

     

    0
  • Armando Olvera

    Eres un dios... funcionó a la perfección =D

    0
  • Kjell Ims

    For me, the only thing that helped was adding the * to the list.  I'm not all that comfortable with allowing EVERY IP to connect. Why should I need to add *? 

    0
  • Nathan Lutz

    This should be included in the HTML file that is included in VIPM. Adding '*' to the list resolved my connection issue, but this is not stated in Appendix B: How to manually configure your LabVIEW version to allow VIPM communication. 

    0
  • Dario Camargo

    This does not solve the connection problems on many computers. Maybe something more in depth should be added as how to detect and solve this connection problem. Is there a log file I could get?

    0
  • ADRIAN GUERRERO

    Muchas Gracias Por Su Ayuda  Funciona Verdaderamente . Dios Le Bendiga..

     

    0
  • Alan González Suárez

    Hello,

    I can't install teh toolkit even doing this. I have LabView 2013 Student Edition and I'm trying to install the arduino toolkit v2.2.0.79. I've already change the port and tried with different combinations of "localhost", "*", *127.0.0.1" and my IP. What else can I do?

    Thanks.

    0

Article is closed for comments.